(A Turn-key Solution For Chicken Poultry Houses)
Using latest technology in maintaining Levels of “ Temperature, Humidity & ODOR”
- Enviro-SOLV ™ units can be made for indoor or outdoor installation
- Rated at ambient temperatures from 15º F to 125º F (for higher or lower ambient please consult us for more information)
- Hermetically sealed scroll compressors (other options available)
- Continuous duty, horizontal TEFC, (check quote write up) (other pumps available)
- Non-ferrous and ferrous piping available
- Stainless steel evaporator (other evaporator options available)
- Stainless steel tank w/ fully welded stainless steel couplers (200g & 400g tank option)
- Galvanized steel cabinet (powdered coated and stainless steel available)
- Available 1 Ton to 120 Ton
- Available voltages:230/3, 460/3, 340/3 (all voltages available upon request)
- Single point electrical connection into disconnect
- NEMA 12/4 electrical enclosure, fully gasketed with lockable disconnect
- Mounting base standard with side fork truck pockets
Air cooled stand alone chiller designed for indoor / outdoor operation. Capacity is 1,200,000 BTU’s/hr at rated conditions. Set up for ambient temperatures 15º F to 125º F (for higher or lower ambient conditions plAir cooled stand alone chiller designed for indoor operation. Capacity is 1,200,000 BTU’s/hr at rated conditions. Set up for ambient temperatures 15º F to 100º F (for higher or lower ambient conditions please consult factory). Outdoor units have lower ambient rating. Four circuit design with 4 independent refrigeration circuits for maximum energy efficiency and redundancy for “zero” downtime.ease consult factory). Outdoor units have lower ambient rating. Four circuit design with 4 independent refrigeration circuits for maximum energy efficiency and redundancy for “zero” downtime.
High efficient scroll compressor, options available depending on application.
This chiller is equipped with a high efficient, pump and TEFC motor. The fluid types are to be water or water/glycol (for other fluids consult us). Output pressure gauge is standard. Manual bypass to allow customer to adjust output pressure and flow is standard.
200 Gallon Standard – 400 Gallon and larger are optional
Stainless steel tank with fully welded stainless steel couplers; it will include: drain, sight glass, and manual fill tube. The sight glass is easily visible from the exterior of the chiller.
- This series of chillers is totally self-contained and requires only a power connection
- High side filter drier
- Thermostatic expansion valve
- Liquid line sight glass
- High and low side pressure switches
- Full refrigerant charge
- Environmentally friendly refrigerant
- Multiple Schrader access points
- Vibration isolators
- Stainless steel evaporator
- High and low side pressure gauges
- Protection screen on air inlet
- Comes standard with a microprocessor temperature controller with LCD display
Industrial Dehumidifier removes over 285 pints per day of moisture from the largest and most severe environments. The reduction in relative humidity protects buildings and their contents from the adverse effects that dampness and moisture cause.
Features of the 220V Industrial Dehumidifier
- The optional internal high capacity condensate pump ensures continual operation without worry.
- Welded steel chassis with baked epoxy-coated and vinyl coatings for abrasion and corrosion resistance.
- An adjustable humidistat to control the level of dryness desired.
- System lamps to report the operating status of the unit.
- Gravity Drain Option – 2 x 5/8″ O/D
- unique “Reverse Cycle” defrosting system, for effective operation in low ambient temperatures down to 33°F.
- Rugged design for harsh industrial environments.